The correct replacement ball for a Curt Pintle Hook Combo, # C48200, with a 2-5/16 inch ball is the Pintle Hitch Ball, # C48830.
The Tow Ready Ball, # 63019, fits pintle hitch # TR63042.
If you were towing a trailer with a lunette ring, you would not remove the ball. The ball is what retains the ring and the top part of the pintle hitch keeps it from jumping up and off of the ball. view full answer...
In order to completely secure the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches part # D900 which has several different hitch pins you'd need three of the etrailer Trailer Hitch Receiver Locks part # e98881 one for each section. view full answer...
For your application I recommend swapping out the ball mount platform that came with the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH64GR for your 2018 Mercedes-Benz GLC300 for the Ball Mount # 391BMU3S which is 5" shorter than the one that you currently have and puts you within 1" of being level which is acceptable.
You can either swap out your current hitch ball or use the Curt # 40038 so you can change out your ball mounts for different trailers without reinstalling... view full answer...
There is a special 2" hitch ball for the Trailer Valet XL # TVXL25, which is available with the Replacement 2" Hitch Ball for Trailer Valet XL Trailer Dolly - 1,000 lbs # TVHB2. This can be used if your Trailer Valet came with the 2-5/16" ball. view full answer...
I am sorry to hear that the tri ball portion of your Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900 was stolen.
You can use the Replacement Tri-Ball for CURT Adjustable Ball Mount # C45800 to replace the portion with the 3 hitch balls.
To keep the hitch secured you may also be interested in the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome # e98881. You can use this to secure the ball mount to the hitch, another to secure the... view full answer...
For towing a trailer with your 2011 Nissan Rogue you'll want a hitch, wiring and a ball mount and you'll be set. The Draw Tite hitch part # 75902 is a confirmed it and would work great. It has a 2 inch opening which is the strongest size available for your vehicle plus it is most concealed aside from the hitch opening. For trailer wiring you'd then want the Hopkins kit part # HM11143645 which is a confirmed fit too.
Since you wanted to do some towing you might be interested in etrailer... view full answer...
The base simply makes exchanging between two hitch ball options easy because no wrench is required. Since it sounds like you simply need the 2 inch ball you will just need the hitch ball # TVHB2 and not the combination with the base. This hitch ball will work perfectly in the base of your Trailer Valet XL # TVXL25. view full answer...
For your 2002 Acura MDX there are a few trailer hitch options. All of them are great and would essentially be just as good as the other. So because of that I would recommend the Curt part # 13328 if it were me as it is priced the best. I attached an install video for this for you to check out as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch... view full answer...
The ball that is included with the Hide-A-Goose Underbed Gooseneck Trailer Hitch, part # 9465-36, is a 2-5/16 inch diameter ball.
If you need a 2-5/16 inch replacement we have 3 to choose from. First, we offer part # 19309. We also carry part # 19306, that has a 1 inch rise and the Reese Gooseneck Hitch Ball, part # 19308, that has a 5 inch offset for your hitch.
We also offer one hitch ball that has a 3 inch diameter that is designed to fit your hitch. It is part # 19307. view full answer...
Thank you for the photos! You have the Hide-A-Goose Underbed Gooseneck Trailer Hitch # 9466 installed on your 2018 Ram 3500 so to replace the hitch ball you just need the following part:
- Replacement Ball for Reese Elite Series and Factory Ford and Dodge Gooseneck Hitches # RP19311
This uses a ball-bearing style application to secure the hitch ball into the gooseneck hitch so no other pins or anything else are required to get this installed. Once you drop the hitch ball into place,... view full answer...
The # 391SUOB20T you purchased comes with the Towing Kit w/ Ball Mount and Trailer Wiring # 391CONVOC3. The 2" receiver # 391RR2 is the only option for a receiver, and none of them are rated for towing. You have to use the Stealth Hitches ball mount that came with the hitch if you want to tow.
If you have lost the ball mount, you can replace it with the Ball Mount for Stealth Hitches Hidden Receiver Hitch # 391BMU3S. You will also need a hitch ball with a 1" diameter shank. You can use... view full answer...
When we installed the hitch part # 75579 on a 2015 Dodge Grand Caravan we found that the hitch height from the ground to the top of the hitch opening was 12-3/4 inches. To allow a trailer with a 17 inch coupler height to be towed level you would need 5-1/4 inches of rise.
So instead for a ball mount you would want the part # 4282. Then for hitch balls part # A-90 for a 2 inch ball or part # 19286 for a 2-5/16 inch hitch ball. view full answer...
For a 2018 Mitsubishi Outlander Sport the etrailer hitch part # e63AR is a confirmed fit and will work well. This is a 2 inch hitch which means it has higher capacities and has more accessories made for it.
For trailer wiring you then would want the part # 118538 if you have LED lights or part # C59496 if you do not.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one... view full answer...
Yes, you can swap the 2" hitch ball # HT33853 on your 6K Husky Center Line Weight Distribution # HT32215 with the 2-5/16" hitch ball # HT39386 since your newer trailer has a larger coupler size.
You just need a 1-7/8" socket like part # ALL643216 to remove your older hitch ball and install the new one. view full answer...
I checked with Andersen, and there is not a replacement steel hitch ball for the Andersen Ultimate Connection # AM3200. The replacement ball for the hitch is an aluminum ball with a zinc coating, which is the following part number:
- Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System # AM3201
If you also need the pin and clip for the hitch ball, that part is the Replacement Pin and Clip for Andersen Ultimate Connection # AM3430. view full answer...
I am not sure what 2005 Lincoln you have, but if it's a 2005 Lincoln LS like what the Curt hitch part # C12253 you referenced is designed to fit the answer would be "no it could not carry a 500 lb scooter on a hitch mounted carrier." The only solution with this vehicle would be with a small trailer towed with this hitch installed.
For trailer wiring you'd then need the part # C55373 which I recommend as it installs easily and is very reliable, and then for a ball mount # 36071 with hitch... view full answer...
Yes, if you are on the replacement hardware kit page, # RHK, you would enter 13084 for hitch # 13084 where indicated for the hitch number and select Curt as the manufacturer to get the proper hardware for that hitch.
I have also linked a video showing installation and the instructions to the right for you.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4... view full answer...
I contacted the manufacturer about replacing the hitch ball on the # DTALBM6825, which is the self-locking series.
The representative informed me that it is recommended to send in the # DTALBM6825 in the event that the hitch balls need to be replaced.
He also informed me that with the Solid-Tow series, like the Adjustable Solid-Tow Aluminum Ball Mount # DTSTBM6600 you can replace the hitch ball on your own, using the included Allen Key.
The Diversi-Tech Ball Mount, part # DTALBM6825,... view full answer...
To replace the hitch ball you would simply loosen and remove the hitch ball nut and pull the ball out of the ball mount hole. You may need a large wrench to loosen the nut.
The Tow Ready 1-7/8 Inch Hitch Ball, part # 19260, would be a great fit for your application, as it features a 1 inch diameter shank that should be compatible with your ball mount.
Please note, however, that some ball mounts for 2 inch x 2 inch hitches require a hitch ball with a 1-1/4 inch shank. If your current... view full answer...
Go To Results